[vc_row disable_element=”yes”][vc_column][vc_tta_tour active_section=”1″][vc_tta_section title=”Ground Penetrating Radar” tab_id=”Ground Penetrating Radar”][vc_column_text]
Ground Penetrating Radar
Ground Penetrating Radar (GPR) is a method in geophysics that uses an electromagnetic wave source in the form of radar. UTSI Electronics developed the GPR survey tool called GroundVue. Most of their systems use twin arrayed antennas to reduce noise. They use very broad band frequency spectrum to produce a high signal to noise ratio, resulting in better depth penetration for the same frequency of antenna & good signal clarity. GPRs are available for purchase or hire and we can field experienced survey teams or recommend a reliable survey provider from our clients. The company provides training in GPR techniques, both for beginners and for more experienced users.
Adaptability:
Mix and match antennas to your own specification. Use the same antennas on a trolley, on a vehicle, or hand-towed. Use the same system for different applications.
Quality Imaging:
- Broad band frequency response to reduce ringing.
- High dynamic range and low noise to aid detection of weaker signals.
- Twin arrayed antennas to improve the signal to clutter ratio.
- Fully screened antennas to reduce EMC (interference).
- Internal data stacking within the reciever – much more efficient than data stacking in post processing.
In collaboration with UTSI ELECTRONICS UK, we act as exclusive agents providing GPR Instruments. Information about the product can be seen in the following brochure:
GroundVue3
Advantages:
- Can operate a wide choice of bistatic antenna from 6GHz, 4GHz, 1.5GHz, 1GHz, 400MHz and 250MHz central frequencies.
- Can be supplied as a single channel or 8 channel system;
- Enabling the operator to optimise their data acquisition procedure by recording either;
- Multiple transects or multiple antenna with a range of frequencies.
- High Speed Single Channel – 1,600 scans per second – consistent with multi-channel operation at traffic speeds
- Tablet or laptop Operation (Windows 8,7 or XP)
- Integrated GPS/GPR (much faster data collection).
- Wi-FI operation, Ethernet cable for frequencies > 1GHz where Wi-Fi cannot be used
- Analytical software – the ReflexW package – is also available. Detail on request.
- Groundvue data is also compatible with Roadscanners, GPR-Slice and Geoscanners software
Application:
- Perfectly suited to civil.
- Structural engineering.
- Environmental and Archaeological applications.
- tility Detection
TriVue
Advantages:
- Multi-frequency Ground Penetrating Radar (GPR) system comprising three bistatic bow tie antenna oriented around an identical common mid-point,
- Housed within a light weight rugged casing.
- The antenna also houses all electronics enabling data to be recorded to a rugged tablet or laptop running Windows OS (XP to 10) via wired or wireless network.
- An internal Li- Ion battery can run the system for up to 10 hours with the option of connecting an external battery for extended operation.
- Integrated GPS/GPR (much faster data collection).
- Wi-FI operation.
- Analytical software – the ReflexW package – is also available. Detail on request.
- Groundvue data is also compatible with Roadscanners, GPR-Slice and Geoscanners software
Application:
- With a bandwidth of 125MHz-2GHz the Trivue is ideally suited for utility detection, ground engineering projects, environmental applications, and road and railway ballast assessment.
- The three antenna: 250MHz, 500MHz and 1GHz central frequency bowtie- mean the system analyses the subsurface in great detail and ensures an operator is equipped for all eventualities.
GroundVue 100
Advantages:
- Monostatic shielded 100MHz central frequency antenna.
- The Antenna utilises a real time analogue to digital converter to provide unbeatable signal to noise at long two way time travels
- The Real time A//D enables the system to stack 7500 times per trace, giving a total of 24 bits data width, and improving the signal to noise ratio of late arrivals. the system has been designed for environmental studies and brownfield site investigations..
- Integrated GPS/GPR (much faster data collection).
- Bluetooth
- Analytical software – the ReflexW package – is also available. Detail on request.
- Groundvue data is also compatible with Roadscanners, GPR-Slice and Geoscanners software.
Application:
- Depth of Peat.
- Depth to bedrock.
- Shallow cavity detection.
GroundVue 6
Advantages:
- Antenna Bandwidth 7MHz to 30 MHz or 15MHz to 60MHz.
- Like all Groundvue Ground Probing Radars, Groundvue 6 is user friendly ans uses easy to operate dedicated software. Operating deth(measured in travel time) is presser with ample margin for ease of use.
- When undertaking a simple common offset reflection survey the systems can be triggered to sample at a specific time interval
- GPS positions are autonomously recorded,
- Data is transferred via wireless network or Bluetooth (please specify on order) to a Windows OS device,
- The intuitive and user interface means data acquisition is simple and quick.
- Hermetically sealed
- Internal batteries
- Analytical software – the ReflexW package – is also available. Detail on request.
- Groundvue data is also compatible with Roadscanners, GPR-Slice and Geoscanners software.
Application:
Specifically designed for
- Mapping sub-surface geological formations in harsh environments
- Ideal for quick lithology investigations,
- Identifying deep void structures
- Mineral exploration.
GroundVue 7
Advantages:
- Frequency 40MHz or 80MHZ central frequency. (specified at time of order).
- When undertaking a simple common offset reflection survey the systems can be triggered to sample at a specific time interval
- GPS positions are autonomously recorded,
- Data is transferred via wireless network or Bluetooth (please specify on order) to a Windows OS device,
- The intuitive and user interface means data acquisition is simple and quick.
- Internal batteries
- Analytical software – the ReflexW package – is also available. Detail on request.
- Groundvue data is also compatible with Roadscanners, GPR-Slice and Geoscanners software.
Application:
Specifically designed to map deep sub-surface anomalies in harsh environments.
Brochure
[/vc_column_text][/vc_tta_section][vc_tta_section title=”Pipe & Cable Locator”][vc_column_text]
Pipe & Cable Locator
Vivax-Metrotech develops and manufactures products for buried utility locating, fiber-optic cable locating, and mapping of buried utilities. Vivax-Metrotech has a vast range of products to accurately locate buried cables and pipes and inspect the interior condition of metallic and non-metallic sewer pipes. We also offer a range of specialized products for locating faults on cathodic protected pipelines, telecom and power cables. We give two product from Vivax Metrotech for utility detection: vLocPro2 and The Loc-150Tx.
- The vLocPro2 (VLP2) utility locator receiver was designed to meet the tough requirements of the modern world. With more and more utilities being buried each day and also abandoned each day, it truly is a jungle beneath the ground. Today’s locator must not only trace the path of a buried utility, it must assure the user that the locate is beyond the shadow accurate. The vLocPro2 (VLP2) is the tool that will give you the same results time after time with speed and, accuracy which leaves you confident in the decision to put the paint mark on the ground.
- The Loc-150Tx transmitter is designed to be powered from CP (Cathodic Protection) stations, AC or external batteries, eliminating the need for internal batteries. This transmitter has a direct connection mode to apply the locate frequency onto the conductor. The Loc-150Tx transmitter has selectable direct connection frequencies from 98Hz to 512Hz (640 Hz in Europe). The two inch by one-inch dot matrix display with LED backlight shows output current, volts, frequency, and over voltage/over temperature/over power warnings.
In collaboration with VIVAX METROTECH, we act as exclusive agents providing the instruments. Information about the product can be seen in the following brochure:
VlocPro2
Advantages:
- Designed to meet the tough requirements of the modern world
- Give the same results time after time with speed and, accuracy which leaves you confident in the decision to put the paint mark on the ground
- Has more than seventy active frequencies from 98Hz to 200kHz as well as several passive modes such as broad and narrow band power and VLF radio and SD (signal direction)
- Once the target line is located use the compass feature to quickly trace the line by following the compass line.
Application:
Specifically designed to locate and tracking utility under the surface.
BROCHURE
Transmitter 10Tx
Advantages:
- Large membrane keypad made for outdoor use
- Multi frequency mode transmits up to 3 frequency simultaneously
- Output protection to up to 240V AC
- Powered by AC or DC ecternal power sources
- 12 x D cell alkaline battery tray
- Optional Li-ion rechargeable battery
- 2,4in x 1,3in (60mm X 32 mm Monochrome-dot-matrix graphic LCD display with LED backlight)
- Optional 300 m/985ft. link to receiver for remote operation
- 8kHz Fault-find mode for locating sheath to ground faults on cables
- Lightweight (3,24 kg with Li-ion rechargeable battery tray)
Application:
Can be used for VLocPro2 receiver as transmitter.
VlocDM2
Advantages:
- The non-intrusive measuring device, the vLocDM2 receiver, takes measurements along the pipeline and plots the results directly onto the screen of the receiver,
- There is no need to carry extra logging and display devices,
- All the data is displayed and logged into the receiver for downloading to a spreadsheet or dedicated analysis program,
- Real-time on-screen mapping
- Integrated GPS and Bluetooth
- Low-frequency 3Hz and 4Hz current mapping
- Identify the location of coating defects
- Operate as a long-line pipeline locator
Application:
Specifically designed to map deep sub-surface anomalies in harsh environments.
BROCHURE
[/vc_column_text][/vc_tta_section][vc_tta_section title=”Geoelectrical/Resistivity”][vc_column_text]
Geoelectrical/Resistivity
Geomative CO., LTD., is a national high-tech enterprise engages in scientific research, design, production, maintenance, sales and system integration. One product from Geomative is geoelectrical or electrical resistivity tomography imaging. There are two series ERT from Geomative CO., LTD; GD-10 and GD-20 :
- GD-10 Resistivity and IP Imaging System is developed based on the latest digital and analog circuitry technique, making it the world leading multi-functional direct current (DC) method instrument. This equipment can be adopted in self-potential (SP), apparent resistivity and induced polarization (IP) surveys. Not only GD-10 supports regular ERT survey configurations, subsurface profiling using both 2D and 3D survey arrays are also supported.
- GD-20 Electrical Resistivity Tomogaphy Imaging System is a brand new multichannel geo-electrical system, designed with 5 or 12 channels and up to maximum 10 survey points can be measured concurrently for ERT survey, highly enhancing field survey efficiency. GD-20 can be used in SP, ERT and IP surveys. Comparing to single channel instruments, GD-20 boosts ERT survey efficiency up to 2-3 times in average and lowering working duration of field survey. GD-20 is portable and equipped with internal storage for data recording. Multichannel switch box. GD-20 is capable of performing VES, ERT and For VES, 12 depths can be measured concurrently. For ERT surveys, data acquisition can record up to 10 concurrent channels. mode satisfies the need for arrays with infinite far electrodes of N terminal, with 10 individual acquisition channel for the best data collection efficiency.
In collaboration with ST Geomative Co., LTD., we act as exclusive agents providing the instruments. Information about the product can be seen in the following brochure:
GEOMATIVEGD-10
Advantages:
- latest digital and analog circuitry technique.
- can be adopted in self-potential (SP), apparent resistivity and induced polarization (IP) surveys.
- supports regular ERT survey configurations.
- subsurface profiling using both 2D and 3D survey arrays are also supported.
- 100% duty cycle for faster data collection and better quality.
- Multi-Dimensional Data Display.
- GD-10 adopted upgradable design where the embedded softrware is fully upgradable. All clients are entitled to lifetime software upgrafe service and the following benefits
- Portable and equipped with internal storage for data recording.
Application:
SP, ERT and IP surveys for:
- Underground water detection
- City engineering exploration
- Pile foundation
- Underground pollutant change detection
- Dam detection
- Underground tank leak detection
Drilling/cross hole detection
Brochure
GEOMATIVE GD20
Advantages:
- Designed with 5 or 12 channels and up to maximum 10 survey points can be measured concurrently for ERT survey
- Highly enhancing field survey efficiency
- GD-20 can be used in SP, ERT and IP surveys
- GD-20 boosts ERT survey efficiency up to 2-3 times in average and lowering working duration of field survey
- 100% duty cycle for faster data collection and better quality.
- Multi-Dimensional Data Display.
- Portable and equipped with internal storage for data recording.
Application:
SP, ERT and IP surveys for:
- Underground water detection
- City engineering exploration
- Pile foundation
- Underground pollutant change detection
- Dam detection
- Underground tank leak detection
Drilling/cross hole detection
Brochure
POWER SOURCE BP-145
Advantages:
- Fully sealed Aluminum AlloyShell
- Over-current protection and over discharge protection
- Displaying work status intelligently
- Control Panel is replaceable
- Portable
- Maximum output voltage :144V
- Maximum output current: 2A
Application:
Can be used for GD-10 and GD-20 Power Supply.
Brochure
[/vc_column_text][/vc_tta_section][vc_tta_section title=”High Pressure Jetting” tab_id=”High Pressure Jetting”][vc_column_text]
High Pressure Jetting
High pressure water jets are great investments for contractors, municipalities, or anyone in the drain cleaning industry. High pressureunits are useful in any industries with reoccurring blockage issues or where by products regularly create drainage problems. High pressure jetting is using streams of high pressure water to clean, cut, and remove debris.
The main components of a high pressure jet are the pump, engine, hose, and nozzle. The pump and engine work together to create high pressure water through the hose to the nozzle. The nozzle has small precision machined orifices that restrict the water flow, thus creating high pressure build up in the hose. Water shoots out of these orifices, and converts from pressure to velocity, and it is the speed of the water combined with the volume that does the work. The angle of the jets in the nozzle create the forward propulsion to take the nozzle up the pipe. Forward facing jets will clear and cut through debris, while rear facing jets flush debris back and propel the nozzle through the pipe. Rotating nozzles create a 360 degree cleaning action which is ideal for grease and root removal.
Some of the truck jetting series from US Jetting are:
- Open Truck Mounted Series
- High Pressure Jetting Trailer
- K-1000 Rodder : Clean the drainage channel with a diameter of 8″ to 24″ (200-610mm).
In collaboration with US Jetting, we act as exclusive agents providing the instruments. Information about the product can be seen in the following brochure:
Download Brochure
[/vc_column_text][/vc_tta_section][vc_tta_section title=”Auger Drilling Rig” tab_id=”Auger Drilling Rig”][vc_column_text]
Auger Drilling Rig
The Big Beaver is the most powerful earth drill produced by Little Beaver, the leading manufacturer of torque-free, one-man earth drills. Ideally suited for drilling environmental test wells, soil sampling and foundation repair, the Big Beaver offers one-man operation and portability in areas inaccessible to truck-mounted units.
The Big Beaver is designed to work with 4″–18″ D-series augers. When deep holes are required, auger extensions can be added to let you drill down to 30′ with a 16″ auger and up to 100′ with a 6″ auger, depending on soil conditions.
In collaboration with Little Beaver, we act as exclusive agents providing the instruments. Information about the product can be seen in the following brochure:
Download Brochure
[/vc_column_text][/vc_tta_section][vc_tta_section title=”Leak Detection” tab_id=”Leak Detection”][vc_column_text]
Leak Detection
The Aqua-M100D is used in the water supply bussines to pre-locate (testrod) and to calibrate leakages (geophone). In combination with the Pulse Wave Generator (PWG), it can also be applied to trace the run of a pipeline. The testrod has been developed by F.A.S.T GmbH and features an extremely high sensitivity. It has been designed to detect even minute leakages. The variable testrod is perfectly well suited to listen to water meters and to systematically check pipeline network sections.
Series of Leak Detection Instrument by F.A.S.T GmbH:
Leak Detectors
- Aqua M300D ( Geophone – Sounding )
Correlators
- Lokal 300
Metal Detector
- MD 100
In collaboration with F.A.S..T GmbH, we act as exclusive agents providing the instruments. Information about the product can be seen in the following brochure
Download Brochure
[/vc_column_text][/vc_tta_section][/vc_tta_tour][/vc_column][/vc_row][vc_row][vc_column][vc_tta_tour][vc_tta_section title=”Ground Penetrating Radar” tab_id=”1589141781750-df48c1ea-acd6″][vc_column_text css_animation=”bounceInUp”]
Ground Penetrating Radar
Ground Penetrating Radar (GPR) is a method in geophysics that uses an electromagnetic wave source in the form of radar. UTSI Electronics developed the GPR survey tool called GroundVue. Most of their systems use twin arrayed antennas to reduce noise. They use very broad band frequency spectrum to produce a high signal to noise ratio, resulting in better depth penetration for the same frequency of antenna & good signal clarity. GPRs are available for purchase or hire and we can field experienced survey teams or recommend a reliable survey provider from our clients. The company provides training in GPR techniques, both for beginners and for more experienced users.
Adaptability:
Mix and match antennas to your own specification. Use the same antennas on a trolley, on a vehicle, or hand-towed. Use the same system for different applications.
Quality Imaging:
- Broad band frequency response to reduce ringing.
- High dynamic range and low noise to aid detection of weaker signals.
- Twin arrayed antennas to improve the signal to clutter ratio.
- Fully screened antennas to reduce EMC (interference).
- Internal data stacking within the reciever – much more efficient than data stacking in post processing.
In collaboration with UTSI ELECTRONICS UK, we act as exclusive agents providing GPR Instruments. Information about the product can be seen in the following brochure:
GroundVue3
Advantages:
- Can operate a wide choice of bistatic antenna from 6GHz, 4GHz, 1.5GHz, 1GHz, 400MHz and 250MHz central frequencies.
- Can be supplied as a single channel or 8 channel system;
- Enabling the operator to optimise their data acquisition procedure by recording either;
- Multiple transects or multiple antenna with a range of frequencies.
- High Speed Single Channel – 1,600 scans per second – consistent with multi-channel operation at traffic speeds
- Tablet or laptop Operation (Windows 8,7 or XP)
- Integrated GPS/GPR (much faster data collection).
- Wi-FI operation, Ethernet cable for frequencies > 1GHz where Wi-Fi cannot be used
- Analytical software – the ReflexW package – is also available. Detail on request.
- Groundvue data is also compatible with Roadscanners, GPR-Slice and Geoscanners software
Application:
- Perfectly suited to civil.
- Structural engineering.
- Environmental and Archaeological applications.
- tility Detection
TriVue
Advantages:
- Multi-frequency Ground Penetrating Radar (GPR) system comprising three bistatic bow tie antenna oriented around an identical common mid-point,
- Housed within a light weight rugged casing.
- The antenna also houses all electronics enabling data to be recorded to a rugged tablet or laptop running Windows OS (XP to 10) via wired or wireless network.
- An internal Li- Ion battery can run the system for up to 10 hours with the option of connecting an external battery for extended operation.
- Integrated GPS/GPR (much faster data collection).
- Wi-FI operation.
- Analytical software – the ReflexW package – is also available. Detail on request.
- Groundvue data is also compatible with Roadscanners, GPR-Slice and Geoscanners software
Application:
- With a bandwidth of 125MHz-2GHz the Trivue is ideally suited for utility detection, ground engineering projects, environmental applications, and road and railway ballast assessment.
- The three antenna: 250MHz, 500MHz and 1GHz central frequency bowtie- mean the system analyses the subsurface in great detail and ensures an operator is equipped for all eventualities.
GroundVue 100
Advantages:
- Monostatic shielded 100MHz central frequency antenna.
- The Antenna utilises a real time analogue to digital converter to provide unbeatable signal to noise at long two way time travels
- The Real time A//D enables the system to stack 7500 times per trace, giving a total of 24 bits data width, and improving the signal to noise ratio of late arrivals. the system has been designed for environmental studies and brownfield site investigations..
- Integrated GPS/GPR (much faster data collection).
- Bluetooth
- Analytical software – the ReflexW package – is also available. Detail on request.
- Groundvue data is also compatible with Roadscanners, GPR-Slice and Geoscanners software.
Application:
- Depth of Peat.
- Depth to bedrock.
- Shallow cavity detection.
GroundVue 6
Advantages:
- Antenna Bandwidth 7MHz to 30 MHz or 15MHz to 60MHz.
- Like all Groundvue Ground Probing Radars, Groundvue 6 is user friendly ans uses easy to operate dedicated software. Operating deth(measured in travel time) is presser with ample margin for ease of use.
- When undertaking a simple common offset reflection survey the systems can be triggered to sample at a specific time interval
- GPS positions are autonomously recorded,
- Data is transferred via wireless network or Bluetooth (please specify on order) to a Windows OS device,
- The intuitive and user interface means data acquisition is simple and quick.
- Hermetically sealed
- Internal batteries
- Analytical software – the ReflexW package – is also available. Detail on request.
- Groundvue data is also compatible with Roadscanners, GPR-Slice and Geoscanners software.
Application:
Specifically designed for
- Mapping sub-surface geological formations in harsh environments
- Ideal for quick lithology investigations,
- Identifying deep void structures
- Mineral exploration.
GroundVue 7
Advantages:
- Frequency 40MHz or 80MHZ central frequency. (specified at time of order).
- When undertaking a simple common offset reflection survey the systems can be triggered to sample at a specific time interval
- GPS positions are autonomously recorded,
- Data is transferred via wireless network or Bluetooth (please specify on order) to a Windows OS device,
- The intuitive and user interface means data acquisition is simple and quick.
- Internal batteries
- Analytical software – the ReflexW package – is also available. Detail on request.
- Groundvue data is also compatible with Roadscanners, GPR-Slice and Geoscanners software.
Application:
Specifically designed to map deep sub-surface anomalies in harsh environments.
Brochure
[/vc_column_text][/vc_tta_section][vc_tta_section title=”Pipe & Cable Locator” tab_id=”1589141781921-ad038715-a233″][vc_column_text css_animation=”bounceInUp”]
Pipe & Cable Locator
Vivax-Metrotech develops and manufactures products for buried utility locating, fiber-optic cable locating, and mapping of buried utilities. Vivax-Metrotech has a vast range of products to accurately locate buried cables and pipes and inspect the interior condition of metallic and non-metallic sewer pipes. We also offer a range of specialized products for locating faults on cathodic protected pipelines, telecom and power cables. We give two product from Vivax Metrotech for utility detection: vLocPro2 and The Loc-150Tx.
- The vLocPro2 (VLP2) utility locator receiver was designed to meet the tough requirements of the modern world. With more and more utilities being buried each day and also abandoned each day, it truly is a jungle beneath the ground. Today’s locator must not only trace the path of a buried utility, it must assure the user that the locate is beyond the shadow accurate. The vLocPro2 (VLP2) is the tool that will give you the same results time after time with speed and, accuracy which leaves you confident in the decision to put the paint mark on the ground.
- The Loc-150Tx transmitter is designed to be powered from CP (Cathodic Protection) stations, AC or external batteries, eliminating the need for internal batteries. This transmitter has a direct connection mode to apply the locate frequency onto the conductor. The Loc-150Tx transmitter has selectable direct connection frequencies from 98Hz to 512Hz (640 Hz in Europe). The two inch by one-inch dot matrix display with LED backlight shows output current, volts, frequency, and over voltage/over temperature/over power warnings.
In collaboration with VIVAX METROTECH, we act as exclusive agents providing the instruments. Information about the product can be seen in the following brochure:
VlocPro2
Advantages:
- Designed to meet the tough requirements of the modern world
- Give the same results time after time with speed and, accuracy which leaves you confident in the decision to put the paint mark on the ground
- Has more than seventy active frequencies from 98Hz to 200kHz as well as several passive modes such as broad and narrow band power and VLF radio and SD (signal direction)
- Once the target line is located use the compass feature to quickly trace the line by following the compass line.
Application:
Specifically designed to locate and tracking utility under the surface.
Transmitter 10Tx
Advantages:
- Large membrane keypad made for outdoor use
- Multi frequency mode transmits up to 3 frequency simultaneously
- Output protection to up to 240V AC
- Powered by AC or DC ecternal power sources
- 12 x D cell alkaline battery tray
- Optional Li-ion rechargeable battery
- 2,4in x 1,3in (60mm X 32 mm Monochrome-dot-matrix graphic LCD display with LED backlight)
- Optional 300 m/985ft. link to receiver for remote operation
- 8kHz Fault-find mode for locating sheath to ground faults on cables
- Lightweight (3,24 kg with Li-ion rechargeable battery tray)
Application:
Can be used for VLocPro2 receiver as transmitter.
VlocDM2
Advantages:
- The non-intrusive measuring device, the vLocDM2 receiver, takes measurements along the pipeline and plots the results directly onto the screen of the receiver,
- There is no need to carry extra logging and display devices,
- All the data is displayed and logged into the receiver for downloading to a spreadsheet or dedicated analysis program,
- Real-time on-screen mapping
- Integrated GPS and Bluetooth
- Low-frequency 3Hz and 4Hz current mapping
- Identify the location of coating defects
- Operate as a long-line pipeline locator
Application:
Specifically designed to map deep sub-surface anomalies in harsh environments.
BROCHURE
[/vc_column_text][/vc_tta_section][vc_tta_section title=”Geoelectrical/Resistivity” tab_id=”1589141909585-9914894f-4e39″][vc_column_text css_animation=”bounceInUp”]
Geoelectrical/Resistivity
Geomative CO., LTD., is a national high-tech enterprise engages in scientific research, design, production, maintenance, sales and system integration. One product from Geomative is geoelectrical or electrical resistivity tomography imaging. There are two series ERT from Geomative CO., LTD; GD-10 and GD-20 :
- GD-10 Resistivity and IP Imaging System is developed based on the latest digital and analog circuitry technique, making it the world leading multi-functional direct current (DC) method instrument. This equipment can be adopted in self-potential (SP), apparent resistivity and induced polarization (IP) surveys. Not only GD-10 supports regular ERT survey configurations, subsurface profiling using both 2D and 3D survey arrays are also supported.
- GD-20 Electrical Resistivity Tomogaphy Imaging System is a brand new multichannel geo-electrical system, designed with 5 or 12 channels and up to maximum 10 survey points can be measured concurrently for ERT survey, highly enhancing field survey efficiency. GD-20 can be used in SP, ERT and IP surveys. Comparing to single channel instruments, GD-20 boosts ERT survey efficiency up to 2-3 times in average and lowering working duration of field survey. GD-20 is portable and equipped with internal storage for data recording. Multichannel switch box. GD-20 is capable of performing VES, ERT and For VES, 12 depths can be measured concurrently. For ERT surveys, data acquisition can record up to 10 concurrent channels. mode satisfies the need for arrays with infinite far electrodes of N terminal, with 10 individual acquisition channel for the best data collection efficiency.
In collaboration with ST Geomative Co., LTD., we act as exclusive agents providing the instruments. Information about the product can be seen in the following brochure:
GEOMATIVEGD-10
Advantages:
- latest digital and analog circuitry technique.
- can be adopted in self-potential (SP), apparent resistivity and induced polarization (IP) surveys.
- supports regular ERT survey configurations.
- subsurface profiling using both 2D and 3D survey arrays are also supported.
- 100% duty cycle for faster data collection and better quality.
- Multi-Dimensional Data Display.
- GD-10 adopted upgradable design where the embedded softrware is fully upgradable. All clients are entitled to lifetime software upgrafe service and the following benefits
- Portable and equipped with internal storage for data recording.
Application:
SP, ERT and IP surveys for:
- Underground water detection
- City engineering exploration
- Pile foundation
- Underground pollutant change detection
- Dam detection
- Underground tank leak detection
Drilling/cross hole detection
Brochure
GEOMATIVE GD20
Advantages:
- Designed with 5 or 12 channels and up to maximum 10 survey points can be measured concurrently for ERT survey
- Highly enhancing field survey efficiency
- GD-20 can be used in SP, ERT and IP surveys
- GD-20 boosts ERT survey efficiency up to 2-3 times in average and lowering working duration of field survey
- 100% duty cycle for faster data collection and better quality.
- Multi-Dimensional Data Display.
- Portable and equipped with internal storage for data recording.
Application:
SP, ERT and IP surveys for:
- Underground water detection
- City engineering exploration
- Pile foundation
- Underground pollutant change detection
- Dam detection
- Underground tank leak detection
Drilling/cross hole detection
Brochure
POWER SOURCE BP-145
Advantages:
- Fully sealed Aluminum AlloyShell
- Over-current protection and over discharge protection
- Displaying work status intelligently
- Control Panel is replaceable
- Portable
- Maximum output voltage :144V
- Maximum output current: 2A
Application:
Can be used for GD-10 and GD-20 Power Supply.
Brochure
[/vc_column_text][/vc_tta_section][vc_tta_section title=”High Pressure Jetting” tab_id=”1589141939506-f1999aa2-0a4d”][vc_column_text css_animation=”bounceInUp”]
High Pressure Jetting
High pressure water jets are great investments for contractors, municipalities, or anyone in the drain cleaning industry. High pressureunits are useful in any industries with reoccurring blockage issues or where by products regularly create drainage problems. High pressure jetting is using streams of high pressure water to clean, cut, and remove debris.
The main components of a high pressure jet are the pump, engine, hose, and nozzle. The pump and engine work together to create high pressure water through the hose to the nozzle. The nozzle has small precision machined orifices that restrict the water flow, thus creating high pressure build up in the hose. Water shoots out of these orifices, and converts from pressure to velocity, and it is the speed of the water combined with the volume that does the work. The angle of the jets in the nozzle create the forward propulsion to take the nozzle up the pipe. Forward facing jets will clear and cut through debris, while rear facing jets flush debris back and propel the nozzle through the pipe. Rotating nozzles create a 360 degree cleaning action which is ideal for grease and root removal.
Some of the truck jetting series from US Jetting are:
- Open Truck Mounted Series
- High Pressure Jetting Trailer
- K-1000 Rodder : Clean the drainage channel with a diameter of 8″ to 24″ (200-610mm).
In collaboration with US Jetting, we act as exclusive agents providing the instruments. Information about the product can be seen in the following brochure:
Download Brochure
[/vc_column_text][/vc_tta_section][vc_tta_section title=”Auger Drilling Rig” tab_id=”1589142000699-1e61ccc9-0d91″][vc_column_text css_animation=”bounceInUp”]
Auger Drilling Rig
The Big Beaver is the most powerful earth drill produced by Little Beaver, the leading manufacturer of torque-free, one-man earth drills. Ideally suited for drilling environmental test wells, soil sampling and foundation repair, the Big Beaver offers one-man operation and portability in areas inaccessible to truck-mounted units.
The Big Beaver is designed to work with 4″–18″ D-series augers. When deep holes are required, auger extensions can be added to let you drill down to 30′ with a 16″ auger and up to 100′ with a 6″ auger, depending on soil conditions.
In collaboration with Little Beaver, we act as exclusive agents providing the instruments. Information about the product can be seen in the following brochure:
Download Brochure
[/vc_column_text][/vc_tta_section][vc_tta_section title=”Leak Detection” tab_id=”1589142047310-6af3afb0-cfd5″][vc_column_text css_animation=”bounceInUp”]
Leak Detection
The Aqua-M100D is used in the water supply bussines to pre-locate (testrod) and to calibrate leakages (geophone). In combination with the Pulse Wave Generator (PWG), it can also be applied to trace the run of a pipeline. The testrod has been developed by F.A.S.T GmbH and features an extremely high sensitivity. It has been designed to detect even minute leakages. The variable testrod is perfectly well suited to listen to water meters and to systematically check pipeline network sections.
Series of Leak Detection Instrument by F.A.S.T GmbH:
Leak Detectors
- Aqua M300D ( Geophone – Sounding )
Correlators
- Lokal 300
Metal Detector
- MD 100
In collaboration with F.A.S..T GmbH, we act as exclusive agents providing the instruments. Information about the product can be seen in the following brochure
Download Brochure
[/vc_column_text][/vc_tta_section][/vc_tta_tour][/vc_column][/vc_row]