Vivax-Metrotech develops and manufactures products for buried utility locating, fiber-optic cable locating, and mapping of buried utilities. Vivax-Metrotech has a vast range of products to accurately locate buried cables and pipes and inspect the interior condition of metallic and non-metallic sewer pipes. We also offer a range of specialized products for locating faults on cathodic protected pipelines, telecom and power cables. We give two product from Vivax Metrotech for utility detection: vLocPro2 and The Loc-150Tx.

• The vLocPro2 (VLP2) utility locator receiver was designed to meet the tough requirements of the modern world. With more and more utilities being buried each day and also abandoned each day, it truly is a jungle beneath the ground. Today’s locator must not only trace the path of a buried utility, it must assure the user that the locate is beyond the shadow accurate. The vLocPro2 (VLP2) is the tool that will give you the same results time after time with speed and, accuracy which leaves you confident in the decision to put the paint mark on the ground.
• The Loc-150Tx transmitter is designed to be powered from CP (Cathodic Protection) stations, AC or external batteries, eliminating the need for internal batteries. This transmitter has a direct connection mode to apply the locate frequency onto the conductor. The Loc-150Tx transmitter has selectable direct connection frequencies from 98Hz to 512Hz (640 Hz in Europe). The two inch by one-inch dot matrix display with LED backlight shows output current, volts, frequency, and over voltage/over temperature/over power warnings.

In collaboration with VIVAX METROTECH, we act as exclusive agents providing the instruments. Information about the product can be seen in the following brochure:

VlocPro2

Advantages:

• Designed to meet the tough requirements of the modern world
• Give the same results time after time with speed and, accuracy which leaves you confident in the decision to put the paint mark on the ground
• Has more than seventy active frequencies from 98Hz to 200kHz as well as several passive modes such as broad and narrow band power and VLF radio and SD (signal direction)
• Once the target line is located use the compass feature to quickly trace the line by following the compass line.

Application:

Specifically designed to locate and tracking utility under the surface.

BROCHURE
VlocPro2

Transmitter 10Tx

Advantages:

• Large membrane keypad made for outdoor use
• Multi frequency mode transmits up to 3 frequency simultaneously
• Output protection to up to 240V AC
• Powered by AC or DC ecternal power sources
• 12 x D cell alkaline battery tray
• Optional Li-ion rechargeable battery
• 2,4in x 1,3in (60mm X 32 mm Monochrome-dot-matrix graphic LCD display with LED backlight)
• Optional 300 m/985ft. link to receiver for remote operation
• 8kHz Fault-find mode for locating sheath to ground faults on cables
• Lightweight (3,24 kg with Li-ion rechargeable battery tray)

Application:

Can be used for VLocPro2 receiver as transmitter.

BROCHURE
Transmitter 10Tx

VlocDM2

Advantages:

• The non-intrusive measuring device, the vLocDM2 receiver, takes measurements along the pipeline and plots the results directly onto the screen of the receiver,
• There is no need to carry extra logging and display devices,
• All the data is displayed and logged into the receiver for downloading to a spreadsheet or dedicated analysis program,
• Real-time on-screen mapping
• Integrated GPS and Bluetooth
• Low-frequency 3Hz and 4Hz current mapping
• Identify the location of coating defects
• Operate as a long-line pipeline locator

Application:

Specifically designed to map deep sub-surface anomalies in harsh environments.

BROCHURE
VlocDM2